Enabling Procedure
Courtesy of GENERAL MOTORS CORP.
- Connect the inflatable restraint side impact module - RF connector (1) located under the passenger seat.
- Install the CPA to the side impact module - RF connector (1).
Courtesy of GENERAL MOTORS CORP.
- Install the F8 Fuse.
- Install the fuse box cover.
- Staying well away from all inflator modules and pretensioners, turn ON the ignition.
- The AIR BAG indicator will flash 7 times.
- The AIR BAG indicator will then turn OFF.
- Perform the Diagnostic System Check-SIR if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check - SIR .