Removal Procedure
- Disconnect the negative battery cable.
- Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
- Remove the air cleaner housing bolts and the air filter housing assembly.
- Disconnect the electrical connector at the pressure transducer.
- Remove the liquid evaporator pipe connector block retaining nut at the cowl.
- Remove the liquid pipe connector block to the condenser retaining bolt.
- Remove the refrigerant suction hose to liquid pipe block retaining nut.
- Remove the liquid evaporator pipe support clamp bolt.
- Remove the liquid evaporator pipe and the refrigerant suction hose.
- Remove the refrigerant suction hose and the refrigerant discharge hose to compressor connector block retaining nut.
- Remove the refrigerant discharge hose connector block bolt at the condenser.
- Remove the refrigerant discharge hose support clamp bolt.
- Remove the refrigerant discharge hose.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.