LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Theft Deterrent System) >> Repair Instructions >> Programming Theft Deterrent System Components (Tech 2) >> Immobilizer Programming Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer Programming Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ON position.
  2. Install the scan tool.
  3. Select IMMOBILIZER PROGRAMMING FUNCTION from the BODY menu.
  4. Follow the scan tool instructions with each key until all keys are programmed.
  5. Turn the ignition to the LOCK position, disconnect the scan tool and test all the keys.
  6. If any key does not function, perform this procedure again with all keys.
  7. If any key does not accept the programming, replace it with a new key and perform this procedure again with all the keys.
scientia non olet · About LEMON Manuals