Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the ECT sensor.
Tighten: Tighten the ECT sensor to 20 N.m (15 lb ft).
Connect the ECT sensor connector.
Fill the cooling system. Refer to Cooling System Draining and Filling .
Connect the negative battery cable.