LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rotor Splash Shield
    GM1245702Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield.
    2. NOTE: Refer to Fastener Notice .
  2. Secure the splash shield to the steering knuckle with the screws.

    Tighten:  Tighten the splash shield-to-steering knuckle screws to 4 N.m (35 lb in).

  3. Install the rotor. Refer to Brake Rotor Replacement .
scientia non olet · About LEMON Manuals