Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the caliper assembly without disconnecting the brake hoses. Refer to Brake Caliper Replacement .
- Remove the caliper bracket.
- Remove the rotor-to-front wheel hub detent screw from the rotor and the front wheel hub.
- Pull off the rotor.
NOTE:
Refer to Brake Caliper Notice
.
IMPORTANT:
To guarantee uniform braking on both sides, both rotors must have identical surfaces regarding smoothness and scoring depth. For this reason, always replace both rotors.