LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Disc Brake System) >> Repair Instructions >> Brake Caliper Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Mark the position of the front wheels relative to the wheel hubs and remove the wheels. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View Of Bolts, Washers & Brake Hose To Caliper
    GM1245697Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Brake Dust Caution .
  3. Remove the fitting and the washers that attach the brake hose to the caliper.
    4. CAUTION: Refer to Brake Fluid Irritant Caution .
    NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .
  4. Disconnect the brake hose, and plug the openings in the caliper and the brake hose to prevent fluid loss and contamination.
  5. Remove the caliper mounting bolts from the steering knuckle.
  6. Remove the caliper assembly.
scientia non olet · About LEMON Manuals