Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the cable to the lock.
- Connect the lock rod.
- Connect the electrical connector.
- Install the luggage compartment lock with the screws.
Tighten: Tighten the luggage compartment lock screws to 6 N.m (53 lb in).
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.