Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
- Position the HVAC control assembly on the center molding and install the retaining screws.
Tighten: Tighten the control assembly retaining screws to 2 N.m (18 lb in).
- Install the audio trim panel.
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.