Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Rear Seat Back with Metal Loops over Hooks

Courtesy of GENERAL MOTORS CORP.

Insert the rear seat back by inserting the metal loops over the hooks.

Fig 2: View of Rear Seat Back and Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the rear seat back with the bolts.
Tighten: Tighten the rear seat back bolt to 25 N.m (18 lb ft).
Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear .