LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Lamp Switch Adjustment

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the stop lamp switch. Refer to Stop Lamp Switch Replacement .
    3. Fig 1: Stop Lamp Switch Electrical Connector
    GM1537923Courtesy of GENERAL MOTORS CORP.
  3. Pull out the shaft of the stop lamp switch to its maximum setting point.
  4. Connect the stop lamp switch electrical connector.
  5. Depress the brake pedal to the bottom.
  6. Install the stop lamp switch in the brake pedal bracket hole by twisting.
  7. Release the brake pedal slowly until reaching the end of the stop lamp switch shaft, the stop lamp switch will be adjusted of itself by the reaction force of the brake pedal.
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals