Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Channel Molding

Courtesy of GENERAL MOTORS CORP.

Lower the front window.
Remove the window regulator handle, if equipped.
Remove the door pull screws.
Using a flat-bladed tool, gently pry off the inside door pull handle cover.
Remove the inside door handle bezel.

Fig 2: Front Side Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Pry off the trim panel.
Disconnect the necessary electrical connectors, if equipped.