LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Rear >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear Rocker Trim Panel and Screw
    GM1248487Courtesy of GENERAL MOTORS CORP.
  1. Install the rear rocker trim panel.
  2. Install the rear rocker trim panel with the screw.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the rear seatback with the bolt.

    Tighten:  Tighten the rear seatback bolt to 25 N.m (18 lb ft).

  5. Install the rear seat cushion.

    Refer to Seat Cushion Replacement - Rear .