LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Manual Transmission Clutch System) >> Repair Instructions >> Pilot Bearing Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pressure Plate, Clutch Disc & J 35271
    GM1375552Courtesy of GENERAL MOTORS CORP.
  1. Remove the transaxle from the vehicle. Refer to Transmission Replacement in Manual Transmission - D16.
  2. Install the J 35271  (2) to the flywheel. See Special Tools .
  3. Remove the pressure plate and the clutch disc. Refer to Clutch and Pressure Plate Replacement .
    4. Fig 2: Removing Transmission Input Shaft Bearing From Crankshaft Using J 23907
    GM1375553Courtesy of GENERAL MOTORS CORP.
    CAUTION: Wear safety glasses in order to avoid eye damage.
  4. Remove the transmission input shaft bearing from the crankshaft using the J 23907  (1). See Special Tools .
scientia non olet · About LEMON Manuals