Assembly Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Piston Assembly

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.

Apply clean clutch fluid to the piston and the cup.
Install the spring to the piston, and insert the assembly into the cylinder body.
Compress the piston with a driver, then install the snap ring with snap ring pliers.

Fig 2: Boot & Pushrod

Courtesy of GENERAL MOTORS CORP.

Install the pushrod and the boot.

Fig 3: Clutch Release Cylinder Assembly

Courtesy of GENERAL MOTORS CORP.

Install the brackets and the bolts.
Install the clutch release cylinder assembly. Refer to Clutch Release Cylinder Assembly .