Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.

Fig 1: Push Rod & Clutch Pedal

Courtesy of GENERAL MOTORS CORP.

Remove the locking clip.
Remove the push rod fixing pin and push rod.

Fig 2: Master Cylinder Hose

Courtesy of GENERAL MOTORS CORP.

Disconnect the hose clamp on the master cylinder.
Disconnect the master cylinder hose.

Fig 3: Master Cylinder Pipe

Courtesy of GENERAL MOTORS CORP.

Remove the master cylinder pipe.

Fig 4: Removing Clutch Master Cylinder

Courtesy of GENERAL MOTORS CORP.

Remove the clutch master cylinder nuts.
Remove the clutch master cylinder.