Assembly Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch Master Cylinder Wall, Piston & Pushrod Assembly

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.

Apply clean fluid to the piston assembly cup and insert the piston assembly and the pushrod assembly into the master cylinder body.

Fig 2: Boot & Piston Stop Ring

Courtesy of GENERAL MOTORS CORP.

Install the piston stop ring using ring pliers. Install the boot.
Install the clutch master cylinder assembly into the vehicle. Refer to Clutch Master Cylinder Replacement .