LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Control Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clutch Control Cable & Cowl Mounting Nuts
    GM1375556Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the clutch control cable to cowl and install the clutch control cable mounting nuts.

    Tighten:  Tighten the nuts 13 N.m (115 lb in).

    2. Fig 2: Clutch Control Cable & Clutch Pedal
    GM1375555Courtesy of GENERAL MOTORS CORP.
  2. Install the battery. Refer to Battery and Battery Tray Replacement in Engine Electrical.
  3. Connect the clutch control cable to the clutch pedal.
    4. Fig 3: Cable Adjust Nut & Clutch Cable
    GM1291936Courtesy of GENERAL MOTORS CORP.
  4. Install the clutch control cable tot he mounting bracket (2).
  5. Install the clutch control cable-adjusting nut (1).
  6. Adjust the clutch control cable.
scientia non olet · About LEMON Manuals