LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Front Suspension System) >> Repair Instructions >> Steering Knuckle Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Axle Shaft Caulking Nut
    GM1241968Courtesy of GENERAL MOTORS CORP.
  1. Remove the front wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  2. Remove the caulking nut.
  3. Remove the tie rod end from the knuckle.
  4. Remove the control arm ball joint.
  5. Remove the brake caliper.
  6. Remove the brake disc. Refer to Brake Caliper Replacement in Disc Brakes.
    7. Fig 2: Backing Plate & Knuckle Assembly
    GM1241969Courtesy of GENERAL MOTORS CORP.
  7. Remove the ABS wheel speed sensor, if equipped. Refer to Wheel Speed Sensor Replacement - Front in ABS.
  8. Remove the backing plate.
  9. Remove the front strut bolts.
  10. Remove the knuckle assembly.
scientia non olet · About LEMON Manuals