Installation Procedure
WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb(s).
- Install the lamp assembly with the screws.
Tighten: Tighten the tail lamp assembly nuts to 3 N.m (27 lb in).
- Connect the electrical connectors.
- Install the luggage compartment rear quarter trim panel.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.