LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Clutch Plate and Hub Assembly Removal >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing J 42428 To Compressor & Holding Compressor Holding Fixture Using A Bench Vise
    GM1251982Courtesy of GENERAL MOTORS CORP.
  1. Remove the compressor. Refer to Compressor Replacement .
  2. Install the J 42428  to the compressor and hold the compressor holding fixture using a bench vise. See Special Tools .
  3. Use the J 33027-A  to keep the clutch drive plate and the hub assembly from turning. See Special Tools . Remove the shaft nut.
    4. Fig 2: View Of Clutch Drive Plate, Hub Assembly, Key & J 33013-B
    GM1251984Courtesy of GENERAL MOTORS CORP.
  4. Thread the J 33013-B  (1) into the hub. See Special Tools . Hold the body of the remover with a wrench and turn the center screw into the remover body to remove the clutch drive plate and hub assembly.
  5. Remove the clutch hub key. Retain the key for assembly (3).
scientia non olet · About LEMON Manuals