LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector & Pressure Transducer
    GM1251931Courtesy of GENERAL MOTORS CORP.
  1. Install the new seal on the A/C pressure transducer.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the A/C pressure transducer.

    Tighten:  Tighten the pressure transducer, using 2 wrenches, to 8 N.m (71 lb in).

  3. Install the electrical connector.
    4. Fig 2: Locating Intake Ducting To Engine
    GM1241530Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner housing bolts and the air filter housing assembly.

    Tighten:  Tighten the air cleaner housing assembly retaining bolts to 12 N.m (106 lb in).

scientia non olet · About LEMON Manuals