Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rack/Pinion Steering Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the pinion lock nut.
Tighten: Tighten the pinion lock nut to 30 N.m (22 lb ft).

Fig 2: Adjuster Plug Locknut From Adjuster Plug Using A Wrench

Courtesy of GENERAL MOTORS CORP.

Install the adjust nut and its lock nut. Refer to Rack and Pinion Gear Rack Bearing Preload Adjustment - Off Vehicle .

Fig 3: Tightening Tie Rod

Courtesy of GENERAL MOTORS CORP.

Install the tie rod.
Tighten: Tighten the tie rod to 100 N.m (75 lb ft).