Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

There is no provision for overhaul or disassembly of the rack and pinion power steering gear. The power steering gear is served only as an assembly.

Fig 1: Adjuster Plug Locknut From Adjuster Plug Using A Wrench

Courtesy of GENERAL MOTORS CORP.

Remove the rack and pinion steering assembly from the vehicle.
Remove the adjuster plug locknut from the adjuster plug, and remove the adjuster plug from the housing with the rack guide spring cap wrench (22 mm).

Fig 2: Adjusting Spring & Rack Bearing

Courtesy of GENERAL MOTORS CORP.

Remove the adjuster spring and rack bearing.