LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Seat Belt System) >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Upper Center Pillar Trim Panel
    GM1248401Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the seat belt height adjuster with the bolts.

    Tighten:  Tighten the seat belt height adjuster bolts to 23 N.m (17 lb ft).

  2. Install the upper center pillar trim panel. Refer to Trim Panel Replacement - Upper Center Pillar in Interior Trim.