Input Shaft Assemble

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cluster Shaft Bearing & Input Shaft Gear Cluster

Courtesy of GENERAL MOTORS CORP.

Press the cluster shaft bearing onto the input shaft gear cluster.

Fig 2: Input Driveshaft & Input Shaft Gear Cluster Assembly

Courtesy of GENERAL MOTORS CORP.

Press the input driveshaft into the input shaft gear cluster assembly.

Fig 3: Snap Ring & Gear Cluster

Courtesy of GENERAL MOTORS CORP.

Install the snap ring at the base of the gear cluster.

Fig 4: Detent Screw & Input Driveshaft

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the detent screw at the end of the input driveshaft.
Tighten: Tighten the input driveshaft detent screw to 15 N.m (11 lb ft).