LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Cooling System) >> Repair Instructions >> Surge Tank Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank And Cap
    GM1241824Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Radiator Cap Removal Caution in Cautions and Notices.
  1. Drain the engine coolant to below the level of the surge tank.
  2. Loosen the overflow hose clamps and disconnect the overflow hose from the top of the surge tank.
  3. Remove the tank attaching nuts.
  4. Remove the tank from the vehicle.
  5. Clean the inside and the outside of the surge tank and the surge tank cap with soap and water.
  6. Rinse the surge tank and the cap thoroughly.