LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Control Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating HVAC Controller Retaining Screws
    GM1251902Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the Instrument panel lower cover. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower in Instrument Panel, Gages and Console.
  3. Remove the HVAC controller retaining screws.
  4. Remove the controller by pulling it out to provide clearance for the removal of the cable.
    5. Fig 2: Mechanical Control Cables & Electrical Connectors
    GM1251904Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the location of the cables and the housings to facilitate their reinstallation.
  5. Disconnect the mechanical control cables by gently prying off the cable eyelet and unsnapping the cable housing from the mechanical slide.
  6. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals