LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls - 1.6L (L91) - Introduction) >> Repair Instructions >> Ignition Coil(s) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of EI System Ignition Coil
    GM1289500Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the EI system ignition coil into the mounting location and install the retaining nuts.

    Tighten:  Tighten the EI system ignition coil retaining nuts to 10 N.m (89 lb in).

  2. Connect the EI system ignition coil connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals