Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Tank And Rollover Valve Tube

Courtesy of GENERAL MOTORS CORP.

Install the rollover valve to the fuel tank.
Install the fuel tank. Refer to Fuel Tank Replacement .

Fig 2: View Of EVAP Canister Purge And Vapor Rear Tubes

Courtesy of GENERAL MOTORS CORP.

Connect the EVAP canister purge tube.
Install the EVAP canister purge tube clip.
Connect the EVAP canister vapor rear tube.
Install the EVAP canister vapor rear tube clip.

Fig 3: View Of Undercarriage

Courtesy of GENERAL MOTORS CORP.

Install the EVAP canister vapor pipe.
Install the EVAP canister vapor pipe mounting screws and cover.

Fig 4: View Of Pipe Clamps

Courtesy of GENERAL MOTORS CORP.

Install the EVAP canister vapor pipe plastic bolt and cover.
Lower the vehicle.

Fig 5: Connecting And Disconnecting EVAP Canister Pipe From EVAP Canister Vapor Rear Tube

Courtesy of GENERAL MOTORS CORP.

Connect the EVAP canister vapor pipe from the EVAP canister vapor rear tube.

Fig 6: View of EVAP Canister Front Tube

Courtesy of GENERAL MOTORS CORP.

Connect the EVAP canister front tube from the EVAP canister purge solenoid valve and the EVAP canister vapor pipe.

Fig 7: View Of EVAP Canister Purge Solenoid Valve

Courtesy of GENERAL MOTORS CORP.

Connect the EVAP canister purge solenoid valve to intake manifold hose.