Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing And Installing CKP Sensor And Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the CKP sensor with the bolt.
Tighten: Tighten the CKP sensor bolt to 6.5 N.m (58 lb in).

Fig 2: Disconnecting And Connecting Crankshaft Position Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the CKP sensor electrical connector.
Connect the negative battery cable.