Installation Procedure
WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air cleaner intake duct.
- Tighten the clamps securing the air cleaner intake duct.
Tighten: Tighten the clamp to 3 N.m (27 lb in).
- Connect the breather tube to the air cleaner intake duct.
- Connect the electrical connector to the IAT sensor.
IMPORTANT:
An improperly installed air cleaner intake duct or breather tube will cause incorrect sensor readings resulting in MIL illumination or a drivability concern.
NOTE:
Refer to Fastener Notice in Cautions and Notices.