Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Air Bag Module

Courtesy of GENERAL MOTORS CORP.

Install the driver air bag module.
Install the connector to the driver air bag module.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the new driver air bag mounting bolts.
Tighten: Tighten the driver air bag module mounting bolts to 8 N.m (71 lb in).
Connect the negative battery cable.