Installation Procedure
WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the side air bag sensor.
- Install the side air bag sensor mounting bolts.
Tighten: Tighten the side air bag sensor mounting bolts to 10 N.m (89 lb in).
- Install the trim to the center pillar.
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.