Conditions for Setting the DTC
WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
The resistance of the passenger side air bag deployment loop is over 2.8 ohms.
DTC 056
| Step | Action | Values | Yes | No |
|---|---|---|---|---|
|
CAUTION:
Refer to SDM Voltage After Ignition Is Turned OFF Caution
in Cautions and Notices.
CAUTION:
Refer to Sensing and Diagnostic Module Handling Caution
in Cautions and Notices.
|
||||
| 1 | Perform the Diagnostic System Check - SIR. Is the Diagnostic System Check - SIR complete? |
- | Go to Step 2 | Go to Diagnostic System Check - SIR |
| 2 | Visually inspect any damage for the passenger side air bag wiring and the connector. Is the air bag wiring damaged or the connector disconnected? |
- | Go to Step 3 | Go to Step 4 |
| 3 | Repair the wiring damage or connect the connector. Is the repair complete? |
- | Go to Diagnostic System Check - SIR | - |
| 4 |
|
10 K Ω | Go to Step 5 | Go to Step 7 |
| 5 |
|
- | Go to Step 6 | Go to Diagnostic System Check - SIR |
| 6 | Replace the passenger side air bag module. Is the repair complete? |
- | Go to Diagnostic System Check - SIR | - |
| 7 | Replace the air bag wiring. Is the repair complete? |
- | Go to Diagnostic System Check - SIR | - |