Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Hood

Courtesy of GENERAL MOTORS CORP.

With the aid of another technician, position the hood in the location marked during removal.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 bolts securing the hood to each hinge.
Tighten: Tighten the hood-to-hinge bolts to 20 N.m (15 lb ft).
Install the washer hose.
Inspect the hood for proper alignment.