Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Cable From Handle

Courtesy of GENERAL MOTORS CORP.

Feed the cable from the luggage compartment to the passenger compartment.
Connect the cable to the handle.

Fig 2: View of Bolt and Handle

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the handle with the bolt.
Tighten: Tighten the remote cable handle bolt to 8 N.m (71 lb in).
Install the floor carpet to its original position.
Install the front and the rear seats. Refer to Seat Replacement - Front Bucket and Seat Back Replacement - Rear in Seats.
Connect the cable to the fuel filler door.
Install the left luggage compartment wheelhouse trim panel, both luggage compartment rear quarter trim panels, and the luggage compartment rear trim panel. Refer to Trim Panel Replacement - Cargo Area Rear (Notchback) or Trim Panel Replacement - Cargo Area Rear (Hatchback) , Trim Panel Replacement - Rear Quarter , and Compartment Trim Panel Replacement - Rear in Interior Trim.