Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Electrical Connections & Turn Signal Switch

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connections to the turn signal switch.
Install the turn signal switch by snapping it into the switch housing.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 2: View of Instrumental Panel Lower Cover

Courtesy of GENERAL MOTORS CORP.

Install the lower steering column cover panel using the lower steering column cover panel screws.
Tighten: Tighten the lower steering column cover panel screws to 3 N.m (27 lb in).
Install the upper steering column cover panel using the upper steering column cover panel screws.
Tighten: Tighten the upper steering column cover panel screws to 3 N.m (27 lb in).
Connect the negative battery cable.