Removal Procedure
WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the lower steering column cover panel by removing the screws.
- With the key in the ignition, turn to ACC and remove the lock cylinder.
To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.
- Remove the ignition switch retaining screw.
- Disconnect the wiring and remove the ignition switch.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.