Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Cleaner Housing Assembly Retaining Bolts | 12 N.m | 106 lb in |
| Air Deflector Screws | 2 N.m | 18 lb in |
| A/C System Hose Connector Retaining Nut | 33 N.m | 24 lb ft |
| A/C Pressure Transducer | 8 N.m | 71 lb in |
| Blower Motor Screws | 6 N.m | 53 lb in |
| Blower Resistor Retaining Screws | 6 N.m | 53 lb in |
| Clutch Drive Shaft Bolt (SP10 Compressor) | 12-15 N.m | 106-133 lb in |
| Clutch Plate and Hub Assembly Nut (V5 Compressor) | 17 N.m | 13 lb ft |
| Compressor-to-Bracket Mounting Bolts | 27 N.m | 20 lb ft |
| Compressor Through Bolt | 10 N.m | 89 lb in |
| Condenser Pipe Connector Block-to-Receiver Dryer Nut | 10 N.m | 89 lb in |
| Expansion Valve Retaining Bolts | 12 N.m | 106 lb in |
| Heater/Air Distribution Case Assembly Retaining Screws | 8 N.m | 71 lb in |
| Liquid Pipe Connector Block-to-Condenser Retaining Bolt | 14 N.m | 10 lb ft |
| Liquid Evaporator Pipe Connector Block Retaining Nut | 15 N.m | 11 lb ft |
| Receiver Dryer Bolt | 14 N.m | 10 lb ft |
| Refrigerant Discharge Hose Support Clamp Bolt | 7 N.m | 62 lb in |
| Refrigerant Discharge Hose Connector Block Bolt | 16 N.m | 12 lb ft |
| Refrigerant Discharge Hose-to-Compressor Block Retaining Nut | 33 N.m | 24 lb ft |
| Refrigerant Suction Hose Connector Block Retaining Nut | 15 N.m | 11 lb ft |
| Upper Condenser Mount Nut | 3 N.m | 27 lb in |