LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Hose Assembly Replacement (Notchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hoses At Tube
    GM1895030Courtesy of GENERAL MOTORS CORP.
  1. Install the left heater hose to the coolant inlet line fitting. Slide the end of the heater hose over the coolant fitting until the hose is seated.
  2. Install the right heater hose to the fitting below the intake manifold. Slide the end of the heater hose over the fitting until it is seated.
  3. Install and seat the other end of each heater hose.
  4. Compress and slide the spring clamps into position on the heater hoses and release the tension on the spring clamps.
    5. Fig 2: Heater Hose Spring Clamps At Cowl
    GM1895028Courtesy of GENERAL MOTORS CORP.
  5. Fill the cooling system.
  6. Inspect the hoses for leaks.
scientia non olet · About LEMON Manuals