Compressor Clutch Plate and Hub Assembly Removal (SP10 Compressor): Removal

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using DW-610-010 & Clutch Hub Holding Tool

Courtesy of GENERAL MOTORS CORP.

Remove the compressor. Refer to Compressor Replacement .
Use the DW-610-010 clutch hub holding tool (1) to keep the clutch drive assembly from turning. See Special Tools .
Remove the shaft bolt.

Fig 2: Clutch Drive

Courtesy of GENERAL MOTORS CORP.

Pull the clutch drive assembly up by hand.