Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Disconnect the blower motor electrical connector.
- Remove the blower cooling hose.
- Remove the screws that secure the motor to the heater/air distribution case.
- Remove the motor and the seal from the heater/air distribution case by gently pulling the motor straight down and out.
CAUTION:
Refer to Battery Disconnect Caution
.