LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Wiring Systems And Power Management - Introduction) >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Fig 1: Steering Column Panels
    GM1715979Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws (6, 7, 8) and the lower steering column cover panel (5).
  4. Fig 2: Ignition Switch
    GM1716033Courtesy of GENERAL MOTORS CORP.
  5. Remove the ignition switch screw (1).
  6. Remove the ignition switch (2).
  7. Disconnect the ignition switch connector.