Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Theft Deterrent Alarm, Mounting Bolts, and Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the theft deterrent alarm with the mounting bolts.
Tighten: Tighten the theft deterrent alarm bracket mounting bolts to 11 N.m (97 lb in).
Connect the theft deterrent alarm electrical connector.