LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) (Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: EVAP Canister Purge Solenoid Bracket
    GM1256165Courtesy of GENERAL MOTORS CORP.
  1. Attach the EVAP canister purge solenoid to the mounting bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the EVAP canister purge solenoid and the mounting bracket to the intake manifold with the bracket bolt.

    Tighten:  Tighten the EVAP canister purge solenoid bracket bolt to 5 N.m (44 lb in).

  3. Connect the vacuum hoses to the EVAP canister purge solenoid.
  4. Connect the EVAP canister purge solenoid connector.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals