Conditions for Running the DTC
- DTCs P0106, P0107, P0108, P0117, P0118, P0122, P0123, P0315, P0336, P0337, P0341, P0342, and P0502 are not set.
- The engine speed is between 600-6,500 RPM and steady.
- The ignition 1 voltage is between 11-16 volts.
- The engine coolant temperature (ECT) is between -7°C and 120°C (19°F and 248°F).
- The fuel level is more than 15 percent.
- The throttle angle is steady within 4 percent.
- The antilock brake system (ABS) and the traction control system (TCS), if equipped, is not active.
- The torque management is not active.
- The transmission is not changing gears.
- The A/C clutch is not changing states.
- The ECM is not in fuel shut-off or decel fuel cut-off mode.
- The ECM is not receiving a rough road signal.
- DTC P0300 runs continuously when the above conditions are met.