LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Pump Replacement (1.4/1.5L SOHC) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Coolant Pump Ring Seal
    GM1241818Courtesy of GENERAL MOTORS CORP.
  1. Install a new ring seal to the coolant pump.
  2. Coat the sealing surface of the ring seal with Lubriplate®.
  3. Install the coolant pump to the engine block.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Secure the coolant pump to the engine block with the mounting bolts.

    Tighten:  Tighten the coolant pump mounting bolts to 10 N.m (89 lb in).

  5. Install the rear timing belt rear hood. Refer to Timing Belt Replacement in SOHC Engine Mechanical - 1.5L.
  6. Refill the engine cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals