LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Diagnostic Information and Procedures >> Diagnostic System Check - Engine Cooling >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. 2:  Lack of Communication may be due to a malfunction of the serial data circuits. The specified procedure will determine the particular condition.
  2. 3:  The presence of DTCs may be related to an engine cooling condition. The specified procedure will compile all the available information before tests are performed.
Diagnostic System Check - Engine Cooling

Step Action Yes No
1 Install a scan tool.
Does the scan tool power up?		 Go to Step 2  Go to Scan Tool Does Not Power Up In Data Link Communications
2 
  1. Turn On the ignition, with the engine OFF.
  2. Attempt to establish communication with the engine control module (ECM).
Does the scan tool communicate with ECM?		 Go to Step 3  Go to Scan Tool Does Not Communicate with Component In Data Link Communications
3  Select the ECM. Display DTCs function on the scan tool.
Does the scan tool display any DTCs?		 Go to Diagnostic Trouble Code (DTC) List in Engine Controls-1.6L Go to Symptoms - Engine Cooling 
scientia non olet · About LEMON Manuals