Troubleshooting with a Test Lamp

Tools Required

J 35616-200 12 V Unpowered Test Lamp. See Special Tools and Equipment .

NOTE: Refer to Test Probe Notice in Cautions and Notices.

A test lamp can simply and quickly test a low impedance circuit for voltage.

The J 35616-200 is Micro-Pack compatible and comprised of a 12-volt light bulb with an attached pair of leads. See Special Tools and Equipment .

To properly operate this tool use the following procedure.

Attach one lead to ground.
Touch the other lead to various points along the circuit where voltage should be present.
When the bulb illuminates, there is voltage at the point being tested.